With the continuous development of science and technology and the wide application of new technology, new materials, new technology, magnetic separator ore separation equipment types more complete, more complex structure, the magnetic separator operator requirements have also been improved.Operators should not only know the structure of the magnetic separator, principle, performance, master the operation skills, but also have the magnetic separator fault diagnosis and maintenance capacity.Good technical level of operators can greatly improve the magnetic separator utilization and completion rate, to avoid human factors caused by the damage of magnetic separator, shorten the magnetic separator maintenance time and maintenance cycle, to create good economic benefits for the enterprise.Magnetic separation pause needs a lot of mine equipment technical conditions, beneficiation production based on the actual demand, magnetic separator equipment division of tailings flow channel, before and after the overflow mouth was running fine grained or fine tailings, mud and underflow tailings mouth run gangue coarse particle surrounding rock, suitable for coarse magnetite roughing pulp with particle size distribution is very wide, coarse difference is very big, or the characteristics of the silt content is very high, big separation chamber, high level, more wake flow channel, make the magnetic separator can withstand larger fluctuations in ore quantity and quantity of pulp.
Understand the magnetic separator mineral separation equipment some operating skills, first of all, the magnetic separator before starting up the whole mechanical transmission system and machine oil for inspection, and then start the magnetic separator and water separation system, after the magnetic separator change to normal before starting the feeding motor.When the feeding motor starts and the chain bucket system operates normally, release the big arm brake.Gradually put it down. When the material in the hopper is more than 2/3, it can be suspended. When 1/3, the big arm can be sponsored.When the big arm is at a 45 degree Angle to the water (i.e., about 5 meters), stop into the big arm.Magnetic separators maintenance quality is the premise and foundation of magnetic separators, so, to master the use of magnetic separators skills, but also do a good job in the maintenance of the machine.
