After the new rain, the weather is late and autumn is coming. This morning, eight large trucks arrived at the company's door. The workshop staff loaded the trucks for customers in an nervous and orderly manner. The supporting equipment for the wet quartz sand production line of the Indonesian customer was shipped one after another.
As a hot-selling product of Guote, the desliming hopper has won unanimous praise from customers for its fine workmanship and excellent quality. The desliming hopper is used as equipment for quartz sand classification, desliming and concentration. Its shape is an inverted cone. A feeding cylinder is set in the center of the liquid surface, and the bottom edge of the cylinder is submerged to a certain depth below the liquid surface. The slurry is fed into the central cylinder along the tangential direction and flows out from the bottom edge after being buffered. The outflowing slurry flows out radially to the surrounding overflow weir. In this process, coarse particles whose settling velocity is greater than the rising velocity of the liquid flow will settle in the tank and be discharged through the bottom sand settling. It enters the overflow tank along with the surface slurry. The feeding particle size is generally less than 2mm.
The desliming hopper produced by Guote can ensure the required concentration and particle size, and has a small area, long settling route, and remarkable desliming effect. As a desliming equipment for quartz sand, the desliming hopper is widely used in various wet production lines, especially the glass sand wet production line and the petroleum fracturing sand production line. The desliming hopper is a must-have equipment.
